OSRC :: Тема: Resins (2/2)

Добро пожаловать, Гость

Обсуждения Магазина

Мы всегда пытаемся помочь всем кто находится на нашей страничке. Если у вас есть вопрос по поводу одного из наших продуктов в магазине или хотите что то добавить, напишите об этом в этой категории и мы вам поможем.

Страница:
1
2

ТЕМА: Resins

Resins 13 года 4 дн. назад #303

ezrael Вне сайта Fresh Boarder Сообщений: 10 Репутация: 0	If you have low heat resistance is good I'm at temperatures above 300 to 400 ° C and completely burned away Do you really burns at high temperature resins, so that nothing of it remain?
	Администратор запретил публиковать записи.

Resins 13 года 4 дн. назад #304

OSFlyerWiz Вне сайта Administrator Сообщений: 415 Спасибо получено: 49 Репутация: 25	The resins were not designed for these temperatures. I haven't tried burning them so i can't really say. It is not advisable Just like with other materials that aren't designed for it.
	Ilios - Building Open Innovation I welcome everyone to participate in Ilios discussions, stories, projects and other related content as well as contribute in any way possible to make the project a truly helpful and versatile tool for everyone to use and constantly improve. Yours, Demetris Z. Администратор запретил публиковать записи.

Resins 13 года 3 дн. назад #305

ezrael Вне сайта Fresh Boarder Сообщений: 10 Репутация: 0	You can also use UV Adhesive? Ultra Violet Curing Adhesive
	Администратор запретил публиковать записи.

Resins 13 года 3 дн. назад #306

OSFlyerWiz Вне сайта Administrator Сообщений: 415 Спасибо получено: 49 Репутация: 25	If the viscosity of the adhesive is near the one that the resins available in the shop has, it is possible. However, each chemical has its purpose and a UV curable adhesive was not designed for 3D printing.
	Ilios - Building Open Innovation I welcome everyone to participate in Ilios discussions, stories, projects and other related content as well as contribute in any way possible to make the project a truly helpful and versatile tool for everyone to use and constantly improve. Yours, Demetris Z. Администратор запретил публиковать записи.

Resins 13 года 2 дн. назад #307

ezrael Вне сайта Fresh Boarder Сообщений: 10 Репутация: 0	What do you think is the right viscosity for resin? And there are other important parameters that must be met except for viscosity, what is? Thanks for you answer
	Администратор запретил публиковать записи.

Resins 13 года 2 дн. назад #308

OSFlyerWiz Вне сайта Administrator Сообщений: 415 Спасибо получено: 49 Репутация: 25	I have no idea. I am not a chemical engineer. The viscosity and other parameters that a material should have for the Ilios HD Kit are the ones that the materials in the shop have
	Ilios - Building Open Innovation I welcome everyone to participate in Ilios discussions, stories, projects and other related content as well as contribute in any way possible to make the project a truly helpful and versatile tool for everyone to use and constantly improve. Yours, Demetris Z. Администратор запретил публиковать записи.