If you need to add more models to your system or alter existing ones, then the Model Settings menu contains all that is necessary to achieve it.
Once in the Model Settings, a list of available models shall be presented. To Select a model from the list, use the Enter function. To edit a model, use the Select function.
To delete a model use the Delete function and to add a new model, naturally use the Add function. Note that only the selected model shall be altered.
Please read the below descriptions carefully before making alterations to your setup.
Model Settings
The Model Settings menu consists of 2 pages, with 5 options on each one. Below you shall find the description for each page.
Name
To properly name your model use the Select function and alter the text as described in the User Settings section. The name of the model shall...
OSRC Blog
Welcome to the OSRC Blog section. Anything and everything related to OSRC can be posted by any member of the community. Feel free to post content about your project, documentation, additions to OSRC or general thoughts.
User Interface
The User Interface can be categorized in 2 main sections. The first section is the Root Menu. In this menu, everything related to the basic (Root) settings of the unit is located. Settings such as the User Name, Channel Count, Accessories, RF Type and others reside within the Root Menu.
The second section is the Model Menu. In this menu you will find everything related to the Model settings. Configurations such as Model Type, End Points, Exponential Curves and others are all located within this section.
The Ordering of these menus is as follows: 1st (The one you will see first after powering up the device) is the selected Home Screen. 2nd (The one you will see if the Enter function is triggered) is the Model Menu. 3rd (The one selected from the Model Menu) is the Root Menu.
- Subscribe to this category
- Subscribe via RSS
- 0 posts in this category
"
