Blogs i write are mostly related to OSRC in one way or another, may it be a user manual, tutorial or something interesting for the reader. Since i developed the OSRC system, naturally writing information about it is my main priority. However now and then i do tend to write my own thoughts about other topics, related to technology.
End Points
- Размер шрифта: Больше Меньше
- Просмотров: 9291
- Комментариев: 0
- Подписаться на обновления
- Печатать
- Поделиться
Learn how to adjust the End Points for channels and which options are available within this section. Although the option should sound familiar to every RC operator, the OSRC firmware has some functionality that may differ from other units.
Unlike the End Values that can be changed within the Root Model Settings, the End Points in this section are what define the absolute minimum values based on those settings. This gives even more flexibility to the operator when adjusting his/her model. For practicality sake, the values displayed are divided by 10. In reality the values shall be automatically recalculated once the settings are set.
It is also good to know that by triggering the Edit/Clear function, the operator can always reset the value back to its original state.
Channel
This option defines which channel shall be modified. When selected, the appropriate values will be refreshed and become ready for alteration. The amount of channels available in this section is directly linked to the amount of channels selected in the Root Model Settings
Minimum
This is the section that defines the minimum channel value. This value shall not go below the value defined in the Root Model Settings
Maximum
This is the section that defines the maximum channel value. This value shall not go above the value defined in the Root Model Settings
"
